Maintenance / Folding
All products must be installed in accordance with accepted good trade practice (and in accordance with supplied instructions where applicable), and maintained in accordance with these procedures or else the warranty shall be void.
Automatic Closers and Operators
Hardware in buildings is subject to deterioration from everyday use, and also from environmental attack due to atmospheric and other conditions. Maintenance of hardware is even more important in severe environments such as coastal marine areas, and some industrial areas. Even stainless steel products require maintenance to prevent deterioration in some environments. Centor requires the following minimum maintenance to be followed otherwise the warranty shall be void.
Track and Bearings
Stainless-steel bearings are manufactured from hardening-grade stainless-steel and although this material performs considerably better than plated steels, it is still susceptible to corrosion unless maintained as described above.
Hangers, Pivots and Brackets
a) general environments - 6 monthly
Regular maintenance is required to all hardware, even stainless steel, otherwise the manufacturer's warranty may be voided.